ORGANIC MINED MINERALS™Use Directions

GARDEN CALCULATOR PLUS OUR

ORGANIC MINED MINERALS™ PRODUCT USE GUIDE

Garden Fertilizer Calculator: Use this calculator to calculate "How much fertilizer should I spread on my lawn?"

"GO GREEN!" ALWAYS USE ORGANIC MINES MINERALS™ ORGANIC PRODUCTS AT THE RATES AS SHOWN BELOW WITH ANY OF THE ABOVE FERTILIZER MATERIALS! "ALWAYS BE SAFE!"

DETOXIFIER - HELPS RETAIN WATER - BUILDS GOOD SOIL - PLANT INTENSIFIER - PLUS!

ORGANIC MINED MINERALS™ (Dry Products) / (LIQUID PRODUCT BELOW)

PRODUCTS SUGGESTED USE GUIDE / APPLICATION-DIRECTIONS

FOR USE ON FLOWERS AND VEGETABLE GARDENS: As a dry soil conditioner – supplement, use anytime for new planting and established plants. Use 4 cups per 100 sq. ft. or 1 tablespoon per small plant. Cultivate lightly into the soil and water thoroughly.

POTTED PLANTS – INDOOR AND OUT: Apply 2 heaping tablespoons per gallon of container size for established plants, slightly more for new plants. Cultivate into moist soil and water.

EVERGREEN, FRUIT TREES AND SHRUBS: Use 2 to 4 cups per inch of the trees trunk diameter measured at knee height. Apply by spreading over the soil under branches away from the trunk and cultivate, or punch holes in the soil with a small rod and filling holes with ORGANIC MINED MINERALS™ (Dry Product). Water in thoroughly.

DECIDUOUS FRUIT TREES: Use 2 to 4 cups per inch of trunk diameter, measured at knee height. Apply 3 times per year in late winter, early spring and early fall. Application: (same as above).

BERRY VINES AND GRAPES: Use ½ to 1 cup per each vine. Apply in early spring and again in early fall. Spread around base of plant root area, cultivate into soil and water thoroughly.

LIQUID-EXTRACT for FOLIAR APPLICATION: Prepare the liquid extract or "tea" for use as a foliar spray or soil application. Add 1/8 to 1/4 cup ORGANIC MINED MINERALS™ (Dry Product) into 1 gallon warm or hot water, and mix well. Let this stand, allowing the un-dissolved particles to settle to the bottom. Apply directly to foliage with garden sprayer or pour directly to soil around base of plant. Use ORGANIC MINED MINERALS™ (Dry Product) every other watering. Any product granules remaining in the bottom of your container can be placed in potted plants, soil, and etc.

(FOR YOUR LIQUID NEEDS TRY OUR 12% LIQUID HUMATE EXTRACT IN GALLON AND QUARTS)

Directions for Use Lawns, Landscapes & Gardens: Apply ORGANIC MINED MINERALS™(Dry Product) to fertile soil at a rate of 2 to 4 cups per 100 square feet, or 10 to 20 lbs. (20 to 40 cups) per 1000 square feet . Increase this amount if necessary, based on the condition of your soil. (This product will not burn plants)

Note: If you have been using chemical fertilizers and want to transition to an all natural lawn, landscape, or garden, we recommend gradually decreasing the use of chemicals by 25% per year and then use natural sources for your Nitrogen, Phosphorus and Potassium needs.

ORGANIC MINED MINERALS™ (Dry Product) may be mixed in with your regular trace elements or fertilizer at any rate from a cup to ½ spreader full (on each application) and you will then be on your way to starting an organic lawn. This may be done on each application. Use your regular spreader fertilizer settings. The same mixtures (rates), as suggested above, may be applied with the type applicators shown below.

As you continue to use ORGANIC MINED MINERALS™ (Dry Product), you will increase the ability of the soil to develop better water retention, thus reducing the amount of water used. Your lawn will develop better color, less water run off, more drought resistance, along with many other features including helping your lawn and garden become child and pet safe.

COMPOST: ORGANIC MINED MINERALS™ (Dry Product) mixed with compost increases the speed of germination and the germination rate by greater than three fold compared to the control topsoil treatment with plant food.

ORGANIC MINED MINERALS™ (Liquid Products)

PRODUCTS SUGGESTED USE GUIDE / APPLICATION-DIRECTIONS

DIRECTIONS: (Lawn an Garden)

Lawns: Use 1 pint per 1000 sq. ft. Apply with an adequate amount of water to soak the humate into the soil.

Indoor Plants: Use 1 tablespoon per gallon of water. Apply to soil every watering.

Vegetables and Flowers: Mix 3 tablespoons per gallon of water. Pour around plants and water into the soil. Repeat every 3-4 weeks during growing season.

Trees: When planting, mix 2 tablespoons per gallon of water. Place root ball in hole, and pour the solution on the root ball. Cover plant roots with soil and apply solution again, water thoroughly. Use 2 tablespoons

Liquid Humate-Extract, per 1 inch diameter of tree, mix with water, thoroughly and soak root area.

Seeds: Soak planting seed in one teaspoon per quart of water or until seed skin is penetrated, plant immediately.

NOTE: For best results use the Liquid Humate-Extract as part of an overall fertilization program. The amount of plant foods and frequency of application can be reduced because Liquid Humate-Extract activates the soil and root system and allows the plant to absorb nutrients more efficiently.

Add Liquid Humate-Extract at a rate of 1 cup per gallon of liquid fertilizer. Do not store in direct sunlight.

ROW CROPS AND PASTURE

DIRECTIONS: FOR LARGE USERS: SOIL: Apply 1-2 gals. Liquid Humate Extract with sufficient water to cover per 1 acre. Broadcast directly onto soil at pre- planting. For best results incorporate into the top 1-2 inches. It is not necessary to use more than 1 gallon per acre twice a year Spring and Fall, application.

ROW CROPS: Mix 1-2 quart Liquid Humate Extract with sufficient water to cover, per acre. Mist tops and bottoms of leaves. Moisten only to the point of run-off.

(USE A MINIMUM OF 5 GALLONS OF WATER PER ACRE.)

More approved application rates:

Liquid Humate can be applied by itself or with almost all liquid fertilizers and liquid nutrients including seeding, pre-plant, side dress, and water runs. It is compatible with almost all fertilizers, nutrients, herbicides, fungicides and defoliants. Fertilizers or nutrients with a very low pH will cause the Humic acids to settle. It will be necessary to agitate your solution to achieve an even application of the Humic acid. If applied by itself: Mix one quart of Liquid Humate with two gallons of water applied in a row as a starter. If applied with other nutrients: Add LIQUID Humate at the rate of ½ gallon up to 2 gallons per acre mixed with other fertilizers or nutrients.

Foliar applications: Pastures and etc.

Apply ½ to one gallon per acre mixed with foliar applied materials. If spraying alone on foliage, dilute at least 1:20 in water.

www.organicminedminerals.com - www.liquidhumate.com - www.earthspride.com - www.triganic.com

DISTRIBUTORS | CONTACT US